Kosár 0
Fun To Do műgyanta (resin)

Fun To Do műgyanta (resin)

14 000 Ft (Bruttó)

Fun To Do műgyanták resin 3D nyomtatókhoz (DLP /SLA / DLP)

Figyelem: a műgyanta veszélyes vegyület, ezért kellő körültekintéssel és a megfelelő környezetben használható csak. Csak elzárt helységben, megfelelő szellőzés mellett használjuk, otthoni környezetben nem ajánlott. Olvassuk el a műgyanta biztonsági adatlapját (pl. a Wanhao MSDS-t) a részleteteket illetően. Védőfelszerelés (kesztyű, esetleg védőszemüveg) elengedhetetlen.  

All our resins are designed to be ultra fast! 
Curing times of 0.5 seconds for 0.02mm layers are easily achieved.

A broad range of reactivity!
The resin have a very broad range of reactivity, it extends from the very short wavelengths of 225nm to the near/visible wavelengths of 415nm. By incorporating a very smart blend of photo initiaters and sensitizers, almost any light source can be used to initiate the polymerization process of our resins. No need to modify your expensive DLP projector! Do you have a laser SLA machine? or perhaps a DLP printer with a LED source of illumination? As long as the wavelength is between 225nm and 415nm, it will work, and it will work fast!
Besides the wavelength of the lightsource several other factors are important, so please check out our properties page. If you are in doubt if your specific machine is compatible with our resins, just send us an e-mail

The Fun To Do resins have an ultra low shrinkage! 
Where 3.5% is regarded little shrinkage, we have the limited the shrinkage to 0.5%
It is basically what you see is what you get. 3.5% seems to be little but if you take an object of 10cm (100mm) 3.5% is 3.5 mm which is nearly half a centimetre! This is huge compared to the 0.5mm the Fun To Do Resins achieve.

A natural resistance to water and most chemicals!
Our resins have a natural resistance against water, in liquid form it is highly hydrofobic. Once fully cured there is hardly any chemical that can disolve our resins. Especially the Industrial blend has a high resistance to chemicals. Cured prints have been withstanding the elements and various chemicals for several years now! To see which chemicals have been tested click here 

​User Friendliness makes you want to build more!

​When designing the resins we have spent quite some effort in making the resin as user friendly as possible. These efforts have resulted in a series of low odor resins with minimal skin irritation.

Affordable resins make it possible for you to build more!
By using our affordable resin you can afford to experiment, extend your knowledge about supports, exposure times, material thickness without having to think about the costs of the materials all the time.

More technical details and properties

Standard Blend MSDS
Industrial Blend MSDS
Castable Blend MSDS
Deep Black MSDS
Snow White MSDS

Standard Blend

Our Standard Blend resin is a real multi purpose resin, most cost effective for printing your day to day objects. The fully cured resin has a hardness of 35 shore D.

Industrial Blend

The Industrial Blend resin has been developed especially for some industrial clients who were in need for a resin that is extra hard and would maintain its structural integrity while exposed to very Low and High temperatures. Because of these properties it is one of the few resins perfectly suitable for vulcanisation.  For relatively low temperature metals like pewter or tin you can also use the Industrial Blend to print your moulds and cast straight from the printed mould. Read all about it in this Instructable ​The hardness of the fully cured resin is 75 shore D. It has been tested from -45C to +225C.

Castable Blend

​The Castable Blend has been designed to cast your pieces in bronze, copper, tin or iron using standard vacuum investment casting methods and settings. It is an Ideal resin for casting pieces of art, Toy models, machine parts. The fully cured resin has a hardness of 73 shore D. Available in Red only.

Snow White

Snow White is the first resin in this market segment that is white, and stays white!
It has a milky white colour, which makes it an ideal resin for printing architectural designs or other designs where white is the predominant colour. Combine Snow White with one of our pigments to create any pastel colour you like. Snow White has a 83 Shore D hardness and has the look and feel of injection moulded plastic. The viscosity is about 80 Mpas which makes it also very suitable for Top Down design printers. Absorption and cure speed are similar to our other blends. 

Deep Black

Deep Black has specifically been designed to get the best out of your  High End DLP/SLA machine. We have combined this special blend with near nano carbon particles, which enables you to print objects in the highest resolutions. Despite being black, the cure times are just as any other of our fast curing resins. The Deep Black has a 81 Shore D hardness and, just like Snow White, has the look and heel of injection moulded plastic. The viscosity is around 80 Mpas, so not only bottom up printers can benefit of the exceptional resolution of Deep Black.

Termék megosztása

Többi termék ebből a kategóriából